Skip to content

Environment variable descriptions (raw)

7,577 distinct values, measured against 42,703 published entries.

Value Entries Share
REMIND_COOKIE=Captured Cookie request header from a signed-in remind.com tab. Optional: the ContextMint Bridge extension captures it automatically. · REMIND_CSRF_TOKEN=Captured x-csrf-token request header value. Optional; paired with REMIND_COOKIE. · REMIND_SESSION_FILE=Path to the cached session file. Defaults to MCP_DATA_DIR/HOME under .remind-mcp. · REMIND_WS_PORT=fetchproxy bridge concentrator port (default 37149). 1 0.0 %
REMOTE_API_URL=URL of the remote recommendation API 1 0.0 %
REMOTE_MCP_SERVER=Override the default remote MCP server URL · SGP_DIRECTORY_API_KEY=SGP Directory API Key 1 0.0 %
REMOTE_PC_MCP_HOST=Interface to bind (default 0.0.0.0). · REMOTE_PC_MCP_PORT=Port to listen on (default 8765). · REMOTE_PC_MCP_TOKEN=Bearer token clients must present. Treat as a root-equivalent credential on the host. 1 0.0 %
REMOTE_TERMINAL_ROOT=Root directory for config files and database 1 0.0 %
REMOTIFY_KEY=Reuse an existing session key instead of creating a new one on startup. · REMOTIFY_URL=Relay to talk to. Override to point at a self-hosted instance. 1 0.0 %
RENDER_API_KEY=Render API key, created at https://dashboard.render.com/u/settings#api-keys · RENDER_MCP_DYNAMIC_TOOLSETS=Registers the render_toolsets tool, which reports which toolsets exist and which are enabled. · RENDER_MCP_READ_ONLY=Expose only non-mutating tools. · RENDER_MCP_TOOLSETS=Comma-separated toolsets to expose, or 'all'. Defaults to all 17 toolsets. · RENDER_WORKSPACE_ID=Default workspace, applied wherever a tool needs an ownerId and the caller omitted one. 1 0.0 %
RENDEX_API_KEY=API key from rendex.dev dashboard 1 0.0 %
RENDOBAR_API_KEY=Rendobar API key (starts with 'rb_'). Get one at https://app.rendobar.com/settings/api-keys. The server starts without it so tools can be listed, but tool calls require it. 1 0.0 %
RENDOC_API_KEY=Your rendoc API key from https://rendoc.dev/dashboard 1 0.0 %
RENTAHUMAN_API_KEY=Account API key created at https://rentahuman.ai/account/api-keys 1 0.0 %
REPEATERBOOK_APP_CONTACT=Contact address used in the API User-Agent. Leave unset: it defaults to the address registered for App #114, and any other value returns 403 ua_mismatch. Set it only if you registered your own separate application with RepeaterBook. · REPEATERBOOK_APP_TOKEN=Per-user RepeaterBook 'rbuapp_' API token. Required: every export needs an approved token, and the server refuses to start without it. No application registration needed - log in to your RepeaterBook account, open https://www.repeaterbook.com/user/api_apps.php, find 'RepeaterBook Python Client' (App #114), and generate a token for it. · REPEATERBOOK_WORKING_DIR=Where the SQLite database and HTTP cache live. Created if missing; a leading '~' is expanded. 1 0.0 %
REPHRASY_API_KEY=Rephrasy API key from your account (rephrasy.ai → Account → API). 1 0.0 %
REPLYATLAS_API_KEY=ReplyAtlas API key (mf_live_…), created in ReplyAtlas → Settings → API Keys on a plan with API access. · REPLYATLAS_BASE_URL=Override the API base URL. Defaults to https://replyatlas.com. 1 0.0 %
REPLYLAYER_API_KEY=ReplyLayer API key. Optional if you ran `npx -y replylayer-mcp init`, which stores it locally. 1 0.0 %
REPLYNODES_API_KEY=ReplyNodes API key (app.replynodes.com → Developers → API Keys & Agents) 1 0.0 %
REPOCONTEXT_REGISTRY=Path to a registry created by repocontext init. 1 0.0 %
REPORTFLOW_API_BASE_URL=Override default Re:port Flow Content Service URL (optional, defaults to https://api.re-port-flow.com) · REPORTFLOW_AUTH_URL=Override default Re:port Flow auth URL (optional, defaults to https://re-port-flow.com/api/v1) · REPORTFLOW_CLIENT_ID=Override default OAuth client_id (optional, defaults to the official public client 'reportflow-mcp') · REPORTFLOW_TOKEN_STORE=Token store backend: 'keychain' (default) or 'file' 1 0.0 %
REPORTIA_BASE_URL=Base URL of the Reportia API (without trailing slash). Example: https://reportia.example.com · REPORTIA_COMPANY_ID=Default companyId used when a tool accepts it as optional. · REPORTIA_COOKIE=Pre-issued Reportia session cookie (e.g. connect.sid=s%3A...). For upstream callers that already hold the resolved user's session and want the child to authenticate as that user without re-login. Mutually exclusive with REPORTIA_TOKEN. Skips /api/auth/login and /api/auth/logout. · REPORTIA_DOWNLOAD_DIR=Directory where downloaded Excel/PDF exports are saved (default ./downloads). · REPORTIA_EMAIL=Email for cookie-session authentication. · REPORTIA_MAX_DOWNLOAD_BYTES=Maximum bytes for a single binary download (default 104857600 = 100MB). · REPORTIA_PASSWORD=Password for cookie-session authentication. · REPORTIA_TIMEOUT_MS=HTTP request timeout in milliseconds (default 30000). · REPORTIA_TOKEN=Bearer token for M2M authentication. Mutually exclusive with REPORTIA_COOKIE; either can be paired with REPORTIA_EMAIL+REPORTIA_PASSWORD (session login) for cookie fallback. · REPORTIA_USER_AGENT=Custom User-Agent header (default mcp-reportia/0.1.0). 1 0.0 %
REPO_GRAPH_REPO=Path to the target repository to map. Alternative to --repo; takes effect when --repo is not passed. 1 0.0 %
REPO_MEMORY_ROOT=Absolute path to the repository whose .ai-memory/ to read/write. Defaults to the current working directory. 1 0.0 %
REPUTA_BASE_URL=API base URL (default https://reputa.xyz). Use http://localhost:5173 for local dev. · REPUTA_PAYER_PRIVATE_KEY=Optional wallet private key (USDC on Polygon) to auto-pay the paid x402 tools (scores, approvals, safe-check, safe-owner details, 24-month chain history). 1 0.0 %
REPUTEMAP_API_KEY=rmk_... — create an API key at https://app.reputemap.com/settings/api-keys (requires a paid plan or trial) 1 0.0 %
RESCUETIME_API_KEY=From rescuetime.com → Account → API 1 0.0 %
RESEARCHTWIN_URL=Base URL for ResearchTwin API (default: https://researchtwin.net) 1 0.0 %
RESEARCHZOSHO_LIBRARY=The library folder (default ~/researchzosho-library) 1 0.0 %
RESEND_API_KEY=Resend API key (https://resend.com/api-keys) · RESEND_ATTACHMENTS_DIR=Directory that local-file attachments are restricted to (disk reads disabled unless set) · RESEND_FROM=Default sender address (verified domain), e.g. 'Acme <hello@acme.com>' · RESEND_READONLY=Set to 'true' to block every mutating tool · RESEND_REPLY_TO=Default Reply-To address 1 0.0 %
RESOURCEGURU_BASE_URL=Base URL for the Resource Guru API. Leave the prefilled default unless your account uses a different regional or self-hosted host. · RESOURCEGURU_EMAIL=Set the RESOURCEGURU_EMAIL credential for the Resource Guru MCP server. · RESOURCEGURU_PASSWORD=Set the RESOURCEGURU_PASSWORD credential for the Resource Guru MCP server. 1 0.0 %
RESY_API_KEY=Pin the api key, beating both the key captured from the live site and the compiled-in default. Rotation does not require it: the key is captured and cached automatically. · RESY_API_KEY_FILE=Absolute path for the api-key cache file. Defaults to $MCP_DATA_DIR/.resy-mcp/api-key.json. Holds the bare key captured from the live site, which takes precedence over the compiled-in default. · RESY_AUTH_TOKEN=Pre-obtained x-resy-auth-token. Overrides email/password and the ContextMint Bridge path. Power users / CI only. · RESY_CAPTURE_TIMEOUT=Seconds to wait for the signed-in page to make an API call the bridge can read the auth token from. Defaults to 30. Capture resolves on the next matching request, so an idle tab needs a longer window than a busy one. · RESY_DISABLE_FETCHPROXY=Set to '1' to disable the fetchproxy fallback (forces RESY_EMAIL+PASSWORD or RESY_AUTH_TOKEN). · RESY_EMAIL=Your Resy account email. Optional — leave unset to use the ContextMint Bridge browser extension instead. · RESY_PASSWORD=Your Resy account password. Optional — leave unset to use the ContextMint Bridge browser extension instead. · RESY_TOKEN_CACHE=Set to false to disable the on-disk token cache and re-authenticate on every process start. Defaults to enabled. · RESY_TOKEN_FILE=Absolute path for the token cache file. Defaults to $MCP_DATA_DIR/.resy-mcp/token.json. · RESY_WS_PORT=Port for the fetchproxy bridge. The whole fleet shares 37149 (the ContextMint Bridge extension dials it), so override only for local development, test isolation, or a hosted bridged registration — this is the variable to name in the registration's bridgePortEnv. 1 0.0 %
RETAILCRM_URL=API key for the service 1 0.0 %
RETAIN_API_KEY=Your API key from Retain 1 0.0 %
RETTIWT_API_KEY=Rettiwt key containing an authenticated X browser session 1 0.0 %
RETURNCHECK_API_KEY=Optional API key. Without it you get the keyless free trial. · RETURNCHECK_FETCH_LOCALLY=Set to 'false' to let the service fetch the page instead of this machine. · RETURNCHECK_TIMEOUT_MS=Budget in milliseconds for the local page read. Defaults to 8000. · RETURNCHECK_URL=Service endpoint. Defaults to the hosted service; change it only if you self-host. 1 0.0 %
REVERSECENTAUR_API_KEY=Your API key from reversecentaur.ai · REVERSECENTAUR_API_URL=API base URL (for self-hosted or staging) · REVERSECENTAUR_MOCK_MODE=Set to true to use fake data without hitting the API 1 0.0 %
REVIBE_API_KEY=Revibe API key (optional — you can also use the revibe_login tool for browser-based auth) 1 0.0 %
REVIEWGURU_API=Override the Review Guru API base URL. Defaults to https://reviewguru.lk — only set this when pointing at a fork or staging environment. 1 0.0 %
REVIEWMETRIC_API_KEY=Your API key from the Review Metric web dashboard 1 0.0 %
REVIT_MCP_HOST=Revit host: local PowerShell, ssh:<alias>, or an http://host:port or https://host:port endpoint. · REVIT_MCP_READ_ONLY=Set to 1 to disable actions that modify or delete model elements without hiding the action tools. Actions run by default. · REVIT_MCP_REDACT_PATHS=Set to 1 to replace document and nested model paths with file names. Disabled by default. 1 0.0 %
REVNUVO_API_KEY=Revnuvo API key (optional — x402 pay-per-call used if omitted) 1 0.0 %
REVOLUT_CLIENT_ID=Client ID from the Revolut Business portal (Settings -> APIs) · REVOLUT_ENVIRONMENT=Target environment: sandbox (default) or production · REVOLUT_JWT_ISS=JWT issuer; defaults to the redirect URI host · REVOLUT_PRIVATE_KEY=PEM contents of the private key (alternative to REVOLUT_PRIVATE_KEY_PATH) · REVOLUT_PRIVATE_KEY_PATH=Path to the PEM private key that signs the client-assertion JWT · REVOLUT_REDIRECT_URI=OAuth redirect URI registered with the certificate (default: https://example.com/) · TOKEN_STORE_PATH=Where OAuth tokens are persisted (default: ./.tokens.json) 1 0.0 %
REWST_API_TOKEN=Rewst API token from an API client you create in the console (sent as a bearer token). · REWST_BASE_URL=Rewst API base URL for your region (default https://api.rewst.io; set for EU/AU). 1 0.0 %
RFPHUB_API_BASE=Base URL of the RFP Hub API. Defaults to https://api.rfpsear.ch. The origin of this URL is bound into every write approval. · RFPHUB_API_KEY=RFP Hub API credential. Needed ONLY to submit; searching and fetching are anonymous and never send it. Setting it is what registers the write tool at all: without it tools/list returns two tools. The key must carry the write scope and must not carry publish; the server checks that before its first submission, so a submission waits for a reviewer's decision. 1 0.0 %
RGX_API=Base URL of the hosted RGX API (default https://trigeochiral.com) · RGX_XPAYMENT=Optional base64 x402 X-PAYMENT payload for paid calls past the free tier 1 0.0 %
RG_MCP_ALLOWED_ROOTS=Colon/semicolon-separated directories the server may read under. Defaults to the working directory. The server refuses any path outside these roots (blocks ../, absolute, and symlink escapes). 1 0.0 %
RHUMB_API_KEY=Governed API key for authenticated repeat traffic on X-Rhumb-Key (optional — discovery works without auth; execution otherwise needs x402 payment) 1 0.0 %
RH_API_KEY=RosettaHUB API key · RH_AWS_REGION=Default AWS region for commands · RH_ORG=RosettaHUB organization name · RH_WSDL_URL=Override WSDL endpoint URL 1 0.0 %
RIDEALONG_DATA_DIR=Profile, secret and artifacts directory (default ~/ridealong-data) · RIDEALONG_LIVE_PORT=Live view port (default 9400) · RIDEALONG_VIDEO=on/off — H.264 live stream via ffmpeg (default on) 1 0.0 %
RIDESHARE_API_KEY=API key for rideshare comparison service · RIDESHARE_API_URL=URL of the rideshare comparison API 1 0.0 %
RIDVAY_API_KEY=Ridvay API key (create one from your account at ridvay.com) 1 0.0 %
RIGHTOS_API_KEY=Operator API key (optional; demo: rk_demo_00000000000000000000) · RIGHTOS_BASE_URL=Override API base URL (default: production) 1 0.0 %

This sheet lists 50 of 7,577 values; they cover 50 entries.

Sheet 119 of 152, 7,577 values in total.

Counted from the projection, the same table the list filters on. An entry counts once per value.

tracevero · https://tracevero.com/werkzeuge/merkmal/mcp/roh_umgebungsbeschreibungen?seite=119